| |
|
|
Please scroll to view all Winding, Positioning
|
PS 125
-
Low-Cost Position Controller |
PS-125 Specifications
|
Low-cost positioning module for single axis, providing excellent characteristics with all kind of closed loop position control.
- Optimized polynomial speed profiles for smooth and precise approach to the target position
- Operation modes for inching, absolute position and repeating cycles of fixed positions
- Incremental position feedback according to RS 422 standard, HTL feedback (10-30V) available on request
- Max. feedback frequency 80 kHz at a control cycle time of only 100 µsec., therefore suited best for dynamic applications
- Index input provides positioning related to print marks etc.
- Easy setup and commissioning procedure by PC operator software
- Full remote control and register access via serial link (RS232 = standard, RS485 = option) when using a PC or one of the mks operator terminals
- Linking to PROFIBUS or CANBUS networks possible by use of the PB251 or CA251 gateways
- Power supply 18 – 30 V, built-in aux. voltage output 5 VDC for encoder supply
- Analogue output +/- 10 V for speed reference of the positioning drive
- Closed 19‘‘ steel cassette for rack mounting and for mounting to DIN rails
|
|
WR 701
-
4-Axis Winding, Unwinding, Traverse and Tension Control |
WR-701 Specifications
|
Firmware for MC700 / MC720 Motion Controllers
- MC700 and MC720 are designed as universal motion controllers for 1 to 4 axis, programmable for multiple motion applications by simple download of the corresponding function firmware.
- With use of our WR701 firmware this unit provides easy solutions with the most common combinations of winding drives, line drives and tension control
- One unit can control up to 4 drives
- Integrated traverse control for winding applications with cables, wires and fibers
- Embedded virtual master axis (selectable) with programmable speeds and ramps
- Easy cascadable for applications using more than 4 drives
Figure top right:
MC700 hardware: Black-box unit for cabinet mounting, remote control and communication facilities via external operator terminal, serial PC communication, CANBUS, PROFIBUS etc.
|
|
